Part Number
Blind Rivet · NASM (NAS-managed replacement for an MS standard) · 11 stocked variants
Reading the part number. NASM90353 is a NASM number: when the Defense Department cancelled most MS hardware sheets, the National Aerospace Standards Committee adopted them as NASM standards, so NASM90353 is the direct successor to MS90353 and the parts are interchangeable.
Because NASM90353 is a specification-level reference, each conforming variant carries its own National Stock Number. The table below lists every variant we stock, with its decoded characteristics and published price — open the NSN record to see the full specification and order that exact item.
| NSN | Item | Key characteristics | Unit price |
|---|---|---|---|
| 5320-01-193-1530 | Blind Rivet | Fastener Length: 0.960 Inches Maximum; Hardness Rating: 53.0 Rockwell C Maximum Stem | $4.38 |
| 5320-01-193-1531 | Blind Rivet | Fastener Length: 0.898 Inches Maximum; Hardness Rating: 53.0 Rockwell C Maximum Stem | $2.81 |
| 5320-01-193-1532 | Blind Rivet | Fastener Length: 0.836 Inches Maximum; Hardness Rating: 53.0 Rockwell C Maximum Stem | $1.75 |
| 5320-01-204-4780 | Blind Rivet | Fastener Length: 0.342 Inches Maximum; Hardness Rating: 326.0 Knoop Minimum And 466.0 Knoop Maximum Sleeve | $0.61 |
| 5320-01-210-2322 | Blind Rivet | Fastener Length: 1.031 Inches Maximum; Hardness Rating: 326.0 Knoop Minimum And 466.0 Knoop Maximum Sleeve | $8.76 |
| 5320-01-210-2324 | Blind Rivet | Fastener Length: 0.366 Inches Maximum; Hardness Rating: 326.0 Knoop Minimum And 466.0 Knoop Maximum Sleeve | $2.62 |
| 5320-01-210-7957 | Blind Rivet | Fastener Length: 0.866 Inches Maximum; Hardness Rating: 326.0 Knoop Minimum And 466.0 Knoop Maximum Sleeve | $2.62 |
| 5320-01-211-4460 | Blind Rivet | Fastener Length: 0.616 Inches Maximum; Hardness Rating: 326.0 Knoop Minimum And 466.0 Knoop Maximum Sleeve | $1.75 |
| 5320-01-231-1346 | Blind Rivet | Fastener Length: 1.115 Inches Maximum; Hardness Rating: 326.0 Knoop Minimum And 466.0 Knoop Maximum Sleeve | $10.52 |
| 5320-01-283-6607 | Blind Rivet | Fastener Length: 1.193 Inches Nominal; Head Style: Flush (Flat) Countersunk (Included Angle - Less Than 135 Deg W Or W/O Chamfer) | $17.52 |
| 5320-01-468-6013 | Blind Rivet | Fastener Length: 0.855 Inches Maximum; Hardness Rating: 326.0 Knoop Minimum Sleeve And 466.0 Knoop Maximum Sleeve | $270.00 |
Country of origin: Türkiye (Turkey) — a DFARS qualifying country. Türkiye is a NATO ally with a reciprocal defense procurement agreement with the U.S. Department of Defense, making it a qualifying country under DFARS 225.003. On DoD and DLA solicitations, qualifying-country end products are evaluated without Buy American price penalties — they compete on par with domestic product — and DoD trade-agreements clauses (DFARS 252.225-7021) expressly accept qualifying-country end products.
Dollar thresholds. The Trade Agreements Act only applies to supply contracts at or above $174,000 (the WTO GPA threshold effective March 2026); below that — where the vast majority of hardware buys fall — the TAA does not apply at all. The main exclusion is civilian-agency solicitations at or above that threshold that restrict award to TAA designated-country products (Türkiye is not TAA-designated). Buyers are responsible for confirming the origin requirements of their specific solicitation.
Full country-of-origin and source documentation is provided with every order. Fulfillment within 90 days of order. Minimum order may apply.
Items are supplied as stock mil-spec / commercial hardware with source documentation and country-of-origin paperwork on every order. Parts are not supplied with an FAA Form 8130-3 airworthiness tag unless expressly stated on the quote. Buyers installing hardware on certificated aircraft are responsible for acceptance under their own maintenance program, repair station procedures, or owner/operator authority.
